First of all,when we choose, we can start from its appearance first. This does not mean that we only pay attention to the external things and ignore the essence. Generally, those produced by regular manufacturers will have fine workmanship. Whether it is the handle, the base, or the entire polishing machine, you can see the quality assurance. And some are not only poor in materials, cut corners, and rough in workmanship, do you still dare to use such a machine? They only pursue profits without any guarantee of quality, and their prices are not cheap and worthless. So be careful.
Secondly, it is to look at its handle style. Which handle is better when using it? Personally, I feel that the polishing machine with the ring handle is relatively high-quality. In this way, it can be stressed in all aspects, the waxing can be uniform, the operation is much more convenient, and the use is relatively stable. If the handle is not flat, it will not be very stable, the waxing will not be uniform, and it is easy to slip off, which is very dangerous.Our product also have many kinds of handle style.
When operating a polishing machine, the key lies in its polishing rate. We all know that waxing needs a low speed of 1000~1800/min, and polishing is 1800~3500/min. However, our car beauty masters do not have too much professional knowledge, and it is easy to be fooled. It is not clear how many rotation speeds should be selected for the polishing machine. It is recommended that users choose a polishing machine that can adjust the speed, so that it can be operated easily, and its operation should be stable, without too much noise or low noise.Of couse,Our polisher have 6-speed control system,can suitable for any links.
We all know that in the process of using the polishing machine, the motor inside will heat up. If the hot air cannot be dissipated in time, it is likely to burn out the machine. Therefore, in order to protect it, it is necessary to pay attention to its heat dissipation holes, which can avoid accidental burns due to overheating, which is also beneficial to the machine. Our new model has put a lot of effort into the cooling system
When waxing a car, what comes into contact with the body is the polishing pad. It is recommended that the detailer choose a soft-sponfge pad to avoid scratching the paint. The diameter should be as long as possible, which can increase the area of waxing, which can save time and effort. On the contrary, when waxing the car on the small polishing pad, it needs to be played back and forth continuously, which is more time-consuming and labor-intensive. The hard sponge, if waxed too many times, will scratch the paint.
Many people will not notice the power cord, think it has nothing to do with the machine, and often ignore it. In fact, it is not. Without its cooperation, how can the car be polished. Therefore, it is recommended that you choose a polishing machine with thick and long wires, so as to ensure that the machine runs well. Some lines are relatively thin, so they are easy to tear, and there is a great safety hazard. In order to ensure our personal safety, we need to be more careful.
Machine safety is not only related to our personal safety issues, but also has a great impact on work efficiency. We suggest that regular maintenance of the machine is very necessary!
