Polishing disks are used to polish and polish objects. There are many types of polishing disks, including crystal polishing disks, wool polishing disks, and flannel polishing disks. Depending on the hardness, you can choose according to your needs.
When polishing, the line of sight should be focused on the edge of the polishing disc, not beyond the corners to prevent throwing through the corners. When polishing the sub-board, there are more corners and more flat surfaces with a smaller area. The edges of the polishing disc can be used to polish these flat surfaces.
How to change different postures according to different surfaces, and decide which surface of the polishing disc to polish different surfaces. When polishing, when the polishing disk is in the car body gap, you can stop the polishing machine, then move the polishing machine in the opposite direction, and press the start button at the same time, the action must be fast. This is the treatment method when the polishing disk is in danger.
The so-called danger is that the gap will cause damage to the polishing disc. What feels difficult to deal with is the part that is on the verge of the gap. What kind of trick should be used to throw it away, not only to avoid the gap but also to throw away the part close to the gap.