1. If the following situations are found, high-speed polishing machine is not allowed.
The operator has not received professional training.
The operator has not learned the "Safety Operating Regulations".
The high-speed polishing machine is not working properly.
2. Before using the high-speed polishing machine, check the environment as follows:
Keep the hands and feet of the operator away from the rotating polishing head.
The operator must not step on the power cord or entangle the power cord in the polishing head.
The operator must dress safely.
The polished area must not exceed the length of the power cord.
The operator is not allowed to take off the operating handle without authorization.
When the machine is stopped, the handle can only be released after the high-speed polishing machine completely stops rotating.
Do not use a polishing pad with dust or dirt to polish. When the polishing pad with too much dirt cannot be cleaned, replace it in time.
When replacing or installing the polishing pad, the power must be cut off.
3. The storage of the high-speed polishing machine cut off the power supply.
Tilt back and store the rear wheel on the ground.
Do not store outdoors, and should be stored in a dry place.